2600+ Mobile successfully working
I read up on the mobo having problems with "no posting", so I used the strip down your mobo method and put the parts in one by one and that did the trick. But there is still one problem I cannot run...
View ArticleRe: 2600+ Mobile successfully working
Hitting 166 on this board takes quite a bit of work, it's a real lottery of sorts, some boards can but most CAN'T...Do 138, 143, 146, 150 Work?If they do 150 may be your limit.166 & 200 are really...
View ArticleRe: 2600+ Mobile successfully working
I have a m2600 barton fsb 266 with a gb of ddr 333. Can boot no issue to 138/138 and with speedfan get to 147/147. Rock stable very fast and temp with full load, lotr baddle for middle earth at 38c....
View ArticleRe: 2600+ Mobile successfully working
Here is my recent experience with both video-card and CPU upgrade. I wanted to share them with you. You will seen that ther are still a few questions for the forum:Upon reading that the very last of...
View ArticleRe: 2600+ Mobile successfully working
Hello Plamo,Very interesting report. Thanks.You can see the PCI bus speeds for each FSB setting by looking at the manufacturer's data sheet for the ICS 9248-199 PLL chip that controls the frequencies...
View Article